Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph

Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph
  • Sellerus66.us
  • List PriceUS$432.46piece
  • Sale PriceUS$309.99piece
  • ShippingFree Shipping
  • Ratings3,6 (611)

Product Description

Features:

60MHz Oscilloscope, 1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
1M Memory Depth.
High Refresh Rate (2500 frames).
Large 5.6 inch TFT Color LCD Display; High Resolution(640*480); Dual-Window Design --More clear, More Detailed
One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform.
Easy-to-use pop-up menu with built-in multi-language help system.
32 Automatic Measurements.
Waveform Math: Add, Subtract, Multiply, and Divide.
Store and recall over.
Automatic cursor tracking measurements.
XY Mode.
Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.
Waveform Recorder to capture/r eplay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.
Pass/Fail function compares a stored waveform to an unknown input.
Average Mode for smoothing waveforms.
Square Wave Output (2V, 1kHz) for probe adjustment.
USB Host/Device 2.0 full-speed interface; support removeable disk; LAN Option, easy to control by PC or long-distance.
Dimensions (mm): 240(L) x 165(W) x 50(H), be carried easily

Specification:


ModelDSO1202BDSO1102BDSO1062B
Oscilloscope mode
Bandwidth200MHz100MHz60MHz
Real-time Sample Rate1GSa/s
Equivalent Sample Rate25GSa/s
Record Length(Sample Points)Single-channel: Maximum 1M; Dual-channel:Maximum 512k
SEC/DIV Range2nS/div-2000S/div (in a 2, 4, 8 sequence)
Delay Time Accuracy500ps
Vertical
A/D Converter8-bit resolution
VOLTS/DIV Range2mV/div¡«5V/div at input BNC
Position Range±50V(5V/div), ±40V(2V/div¡«500mV/div), 2V(200mV/div¡«50mV/div)±400mV(20mV/div¡«2mV/div)
Rise Time at BNC≤1.7ns≤3.5ns≤5.8ns
DC Gain Accuracy±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
Trigger
Trigger Sensitivity
(Edge Trigger Type)
DC: CH1/CH2(Typical) 1div from DC to 10MHz; 1.5div from 10MHz to Full
EXT£¨Typical£© 200mV from DC to 40MHz
EXT/5£¨Typical£© 1V from DC to 40MHz
AC: Attenuates signals below 10Hz

HF Reject: Attenuates signals above 80kHz

LF Reject: Attenuates signals below 150kHz

Noise Reject: Reduces trigger sensitivity
Trigger Level RangeCH1, CH2: ±8 divisions from center of screen
EXT: ±1.2V EXT/5: ±6V
Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns)
CH1, CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
Holdoff Range100ns-10s
Trigger Type
EdgeTrigger on the rising or falling edge
Pulse WidthTrigger (when >,<,=,≠) on positive or negative pulses
Pulse Width Range: 20ns-10s
VideoTrigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
SlopeTrigger (when >,<,=,≠) on a positive or negative slope
Set Time: 20ns–10s
Overtimefrom the rising or falling edge
Set Time: 20-10s
AlternateInternal trigger on edge, pulse width, video or slope
Measurement
CursorsManual: The difference between voltage cursors ¡÷V; the difference between time cursors ¡÷T; 1/¡÷T calculated by Hz.
Tracing: The voltage and time at a waveform point
AutomaticPk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
Meter Mode
Max.Resolution6,000 Counts
DMM Testing ModesVoltage, Current, Resistance, Capacitance,Diode & Continuity
Max. Input VoltageAC: 600V, DC: 800V
Max. Input CurrentAC: 10A, DC: 10A
Input Impedance10 MΩ
Display
TypeRight angle 5.6 16-digit color LCD
Resolution640 x 480 dots
Contrast16 gears, with the progress bar to show adjustment
InterfaceUSB host and USB slave, Lan Optional
Power Supply
Voltage DC Input: 12-17VDC, 1500mA
Mechanical
Size245 x 163 x 52 (mm)

Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph
Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph
Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph

Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph
Package Included:
1 x Hantek DSO1062B Digital Handheld Oscilloscope
2 x Oscilloscope Probe
1 x Test Probe
1 x USB Cable
1 x CD and Manual
1 x Wall charger with EU,US, Standard Plug
1 x Package bag

Detail Pictures:

Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph

Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph

Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph

Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph

Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph